My Water Filter Reviews

How to Change a Whole House Water Filter

 

Changing your whole house water filter is essential for maintaining clean and safe water in your home for you and your loved ones. If you feel uncomfortable performing this task yourself, it’s always a good idea to consult with a certified plumber or handyman. However, if you’re ready to tackle the job yourself, follow these general steps on how to change a whole house water filter. Keep in mind that the specific steps may vary depending on your filter’s make and model.

 

Steps to Change a Whole House Water Filter

  1. Gather Your Tools and Materials

    • New filter cartridge
    • Adjustable wrench
    • Bucket or towel (to catch any spills)
    • Safety gloves

  2. Turn Off the Water Supply

    • Locate the main water shutoff valve, usually found near the water meter, and turn it off to prevent any leaks or flooding during the process.

  3. Release Pressure from the System

    • Open a faucet in your home to release any pressure in the system. This will make it easier to remove the filter.

  4. Remove the Old Filter

    • Locate the filter housing, which is typically a large cylindrical container. Use the adjustable wrench to loosen the housing. Turn it counterclockwise until you can remove it by hand.
    • Carefully pull out the old filter and dispose of it according to local regulations.

  5. Install the New Filter

    • Take your new filter and remove any protective packaging. Insert the new filter into the housing, ensuring it fits snugly.
    • Reattach the housing by turning it clockwise until secure. Use the wrench for a tight fit but be cautious not to over-tighten.

  6. Turn the Water Supply Back On

    • Slowly open the main water shutoff valve to allow water to flow back into the system. Check for any leaks around the housing.

  7. Flush the System

    • Open a faucet and let it run for a few minutes to flush out any debris and air from the system. This helps ensure that the new filter works effectively.

  8. Check for Leaks

    • Inspect the filter housing and connections for any leaks. If everything looks good, your filter change is complete!

Important Note: Always refer to the user manual for your specific make and model for any additional instructions or precautions.

 

Helpful Links for How-To Guides

For detailed instructions tailored to specific brands, here are links to how-to articles from the top whole house water filter brands:

  1. Aquasana: How to Change an Aquasana Filter
  2. Home Master: Home Master Filter Change Instructions
  3. Apex: Apex Water Filter Maintenance Guide
  4. iSpring: iSpring Whole House Filter Change Guide
  5. Pelican: Pelican Filter Replacement Instructions

By following these steps and utilizing the resources provided, you can successfully change your whole house water filter and ensure your home has access to clean, safe water. If you encounter any issues or have further questions, don’t hesitate to reach out to a professional for assistance.